Background: If you are having issues upgrading your UniFi access points, a common issue that has recently occurred is a result of the UniFi access points running a very old firmware versions that require a staged upgrade to reach the current version. The UAP Gen1 series access points (UAP/UAP-LR/UAP-Outdoor/UAP-Outdoor-5) running firmware vers...

Below is a step by step guide on how to configure a UniFi Access Point using the Unifi Controller Software. Head to the link below, scroll down to the Software section, find and download the latest version of the software for your platfrom (Windows, Linux and macOS): https://www.ui.com/download/unifi Once downloaded run the UniFi-...

In this blog we will demonstrate how to configure an advanced UniFi network. The equipment we will be using is: UDM-Pro - https://www.gowifi.co.nz/ubiquitinetworks/udm-pro.html USW-24-POE - https://www.gowifi.co.nz/ubiquitinetworks/usw-24-poe.html UAP-NanoHD - https://www.gowifi.co.nz/ubiquitinetworks/uap-nanohd.html UAP-FlexHD - https://w...

Login to the unifi controller and under settings choose Guest Control and enable Guest Portal option. Select Hotspot for the authentication type: Click on the Go to Hotspot Manager (bottom right corner) which takes you to a new window with voucher options. Choose the vouchers option on the left hand side then click on create vouchers...

In this blog we will demonstrate how to create a WiFi network within the UniFi Network Controller running v6.x.x using the "New" settings. How-to Step 1: Open your UniFi controller and navigate to the WiFi section of the Settings page Step 2: Fill in the following details Name - This is the WiFi name displayed on your phone/laptops...

This article gives some examples on policy based routing with the UniFi Security Gateway. UniFi and the USG models currently support Load Balancing or Failover when configuring Dual WAN setup in UniFi however if you want to configure a more advanced Policy Based Routing then this guide is for you. Network Diagram: Preparation: It is ...

In this blog, we will demonstrate how to set up a UniFi Dream Machine Pro with PPPoE, VLAN-Tagged WAN. This is applies to internet providers such as Spark NZ. This blog will use a laptop to configure the appropriate settings. The UniFi Network mobile app could also be used.  Please note, the same configuration could also be applied to the s...

             Scenario: This scenario will explain how to managed UniFi Access Points across multiple subnets with only one UniFi Controller.  Important: As of writing, there is currently an issue with adopting UniFi Access Points across multiple subnets. As a result, we have adopted our UniFi Access Points with the Controller above on th...

From UI's press release: "Site Magic allows you to easily inter-connect UniFi Gateways across multiple locations with just a few clicks to create a high-performance and scalable SD-WAN. Instead of setting up complicated manual site-to-site VPNs and networking between multiple gateways, simply select the gateways you want to connect thro...

Scenario: Your wireless network at your site is on a different subnet to what your UniFi controller is going to be sitting on. This guide assumes that you have already set up your UniFi Controller. Why you may do this: If your organisation has a lot of users/traffic, it is recommended to segment these into different networks to decreas...