Home Home Shop Browse Topics Blog
Home Shop Browse Topics Blog
Solution home Ubiquiti Networks

airMAX

  • Extending wireless coverage with airMAX radios
    Scenario: You have just purchased a Ubiquiti Outdoor Wireless Access Point to extend your wireless coverage. This simple guide will explain the basic settings required to get your Ubiquiti Access Point configured to start serving laptops and mobile devices. Preparation: I don't know how to get to the Login page of my Ubiquiti Wireless Access P...
    Wed, 9 Oct, 2019 at 4:29 PM
  • How to configure a PtP link with the Ubiquiti GigaBeam
    For this tutorial, we will use a set of two Ubiquiti GigaBeam radios to create a PtP link. The GigaBeam is a 60 GHz radio designed for low-interference and high-throughput connectivity. It includes a 5 GHz radio for failover. For the 60 GHz link, the GigaBeam supports full bandwidth use of 2.16 GHz. Getting Started: By default these...
    Wed, 21 Oct, 2020 at 1:07 PM
  • PoE Passthrough on a NanoSation 5AC
    The Ubiquiti NanoStation 5AC (NS5AC) has a poe passthrough port which can power a secondary access point or camera. The secondary port is PASSIVE, this means that it will pass the source voltage through that powered the NanoStation to the secondary port. IMPORTANT: The included POE injector only has enough current to power the NanoStat...
    Thu, 13 Feb, 2020 at 2:22 PM
  • Ubiquiti M2 / M5 Point to Multi Point Wireless Bridge (AirOS 5)
    Scenario: This article explains how to create a Ubiquiti Point to Multipoint Wireless Network. This configuration requires completion of the Ubiquiti Point to Point WDS Bridge before continuing. Step 1: Connect the NSM5 (Station) to your laptop or network and navigate to the Wireless tab. Wireless Mode: Station WDS (Transparent Bridge M...
    Wed, 22 Apr, 2020 at 3:07 PM
  • Ubiquiti M2 / M5 Point to Point Wireless Bridge (AirOS 5)
    Scenario: In this article we will explain the basic configuration required to configure a Wireless Point to Point WDS Bridge with a pair of Ubiquiti NanoStation M5 AP/CPE. You should be able to follow this guide with any of the Ubiquiti AirMAX airOS Devices (Loco M, NanoStation M, NanoBridge M, AirGrid M, PowerBridge M, PicoStation M, Bullet M...
    Mon, 17 May, 2021 at 12:04 PM
  • Ubiquiti Point to Multi Point Wireless Bridge (airOS 8)
    In this blog we will show you how to configure a transparent Ubiquiti Point to Multi Point bridge in the current version (8.4.2) of AirOS 8 using a Rocket 5AC Prism GEN2 as the AP Radio, a Nanobeam 5AC-Gen2 and Powerbeam 5AC-Gen2 as station/client radios.  This same configuration can be used for any of the AirMAX AC products (NanoBeam AC, P...
    Thu, 12 Dec, 2019 at 10:57 AM
  • Ubiquiti Point to Point Transparent Bridge (airOS 8)
    There are a range of situations where running a cable from Point A to Point B is not possible typically due to physical constraints or cost. With a transparent wireless bridge you can link buildings across a street without digging up the road, connect a cowshed 2km's away from your house or even connect a remote camera to your network wirelessl...
    Mon, 28 Jun, 2021 at 1:40 PM
  • Contact Us
  • +64 3 741 1339

  • help@gowifi.co.nz
  • Go Wireless Warehouse/Office

    Unit 5, 1 Kingsford Smith Drive 7400, Rangiora
  • Connect with us
Terms of service

-

privacy policy

Copyright © Go Wireless NZ Ltd. All Rights Reserved.