1. Login to your Cambium R190V Router. The default settings to login are:

    IP Address:

    Username: admin

    Password: admin

  2. Ensure your analog phone is connected to FXS port 1 on your R190V and then navigate to FXS1 and configure the following settings:

    Line Enable: Enable

    Outbound Server: sip.2talk.co.nz

    Phone Number: your_2talk_number

    Account: your_2talk_number

    Password: your_2talk_password

  3. Save settings at the bottom of the page and then test to see if you have dial tone and can make inbound and outbound calls.