MikroTik Audience setup for common NZ Fibre Connections

In this video blog, we will demonstrate how to setup the MikroTik audience on two types of Fibre connections (PPPoE and DHCP). We will proceed through the setup wizard for first connection, we will then configure a VLAN tag (common for NZ Fibre connections) and then modify the existing NAT rule to establish communication over the internet.

Requirements: 1x MikroTik Audience (https://www.gowifi.co.nz/routers/rbd25g-5hpacqd2hpnd.html) and 1x Android or IOS device with the MikroTik app installed (https://mikrotik.com/mobile_app)

In this first video we demonstrate the first time setup wizard:

In this video we demonstrate how to modify the default configuration to be compatible with ISPs who use PPPoE with VLAN 10, i.e. Spark:

In this video we demonstrate how to modify the default configuration to be compatible with ISPs who use DHCP with VLAN 10, e.. TrustPower:

Hopefully at this point you should have internet access and are free to make any other additional changes you want out of your Audience router, e.g. LAN Subnet.