The MikroTik RouterOS is very powerful and flexible and is widely used in all kinds of environments from a simple home user network to large enterprise networks. This tutorial is intended to help you understand the MikroTik RouterOS and to show you how to configure a MikroTik router from start to finish with some of the most commonly used setti...

S+RJ10is a unique 6-speed RJ-45 SFP+ module that is based on a Marvell 88X3310P transceiver. It offers up to 10 Gbps speeds using twisted-pair copper cables. All of the current MikroTik devices that have an SFP+ cage support the S+RJ10 module. This article serves as a guideline of the S+RJ10 usage in MikroTik devices with both passive or active...

So there are a few different ways to run MikroTik's winbox64.exe on a Mac computer. This is an article explaining the way I do it, with instructions on how to implement this yourself. Every time I go to open Winbox, I open up a terminal window, and push the up arrow key to get back to my command 'wine winbox64.exe' and Winbox will launch. If ...

With RouterOS 7, the WifiWave2 package is used for managing 802.11ax and 802.11ac wave 2 wireless interfaces. For further information, please refer to MikroTik's help page: https://help.mikrotik.com/docs/display/ROS/WifiWave2 This page is designed if you have a router with no configuration on it - The interfaces will look similar to ...

Scenario: In this article, we will explain how to perform a Netinstall on a MikroTik RouterBOARD with or without a serial port. Preparation: Netinstall using a RouterBOARD with a Serial Port - Start at Step 1. Netinstall using a RouterBOARD without a Serial Port - Start at Step 4. Step 1: Download PuTTY SSH and Telnet Client: https://www.put...

In this video blog, we will demonstrate how to setup the MikroTik audience on two types of Fibre connections (PPPoE and DHCP). We will proceed through the setup wizard for first connection, we will then configure a VLAN tag (common for NZ Fibre connections) and then modify the existing NAT rule to establish communication over the internet. ...

This is a basic DHCP with VLAN10 Fibre configuration script for MikroTik Routers running the latest RouterOS V7. The script assumes you have a blank Routerboard, if your device has existing configuration you should run this command before loading the script: # Warning, this will erase all configuration and require connection via MAC Add...

This is a basic PPPoE with VLAN10 Fibre configuration script for MikroTik Routers running the latest RouterOS V7. The script assumes you have a blank Routerboard, if your device has existing configuration you should run this command before loading the script: # Warning, this will erase all configuration and require connection via MAC Ad...

This is a basic script to set up a fibre connection on a MikroTik RouterOS device. This is part 1 of 2 for setting up a MikroTik Routerboard with Fibre, with a CRS Switch off that with VLANs # Main Router setup for fibre # with trunk port (ether5) to go to CRS for 'router on a stick' setup # this script requires a blank routerboard # port 1 ...

This is a script for a MikroTik CRS 'Router on a Stick' setup This is part 2 of 2 for setting up a MikroTik Routerboard with Fibre, with a MikroTik CRS Switch off that with multiple VLANS There is a trunk port coming into port ether1 with vlans 10, 20 & 30 Ports 2-8 are outputting vlan 10 Ports 9-16 are outputting vlan 20 Ports 17-24 ...