Home Home Shop Browse Topics Blog
Home Shop Browse Topics Blog
Solution home Cambium Networks

ePMP

  • Cambium ePMP 1000 Hotspot Conversion
    Some customers may choose to use the EPMP1000 Radio as a CNPilot Device that can be managed in CNMaestro. Using the hotspot firmware also allows for this device to Mesh to a Cambium E400/E410/E500 etc. My example shows upgrading a new unit that started with Firmware version 2.3.4. If your unit comes with an older firmware than this, you will...
    Thu, 12 Dec, 2019 at 9:35 AM
  • Cambium ePMP Force 300 Point to Multi Point Configuration (Release 4.7)
    With Cambium Networks' latest ePMP firmware release (4.7), they have added the ability to create small, affordable Point to Multi-Point (PtMP) networks, utilising any Force 300 device as both the Access Point and Subscriber Module. When configured in TDD mode, they now support up to 12 Subscriber Modules; this is perfect for connecting a co...
    Fri, 3 Feb, 2023 at 3:04 PM
  • Cambium EPMP3000L Point to Multi Point Bridge Configuration
    There are many use cases for a PTMP (Point to Multi Point) Bridge.  Scenarios we often come across here at Go Wireless are for solutions to bridge security cameras back to a central Access Point Radio, (often due to lack of cabling infrastructure on the site), bridge back WiFi Access Points to a central Access Point and for a WISP to offer ...
    Thu, 23 Apr, 2020 at 10:05 AM
  • ePMP 1000 Point to Point Wireless Bridge
    Background: Cambium ePMP radios support an impressive 200+ Mbps throughput to deliver bandwidth-intensive services such as VoIP (Voice over IP), video and data to end users across multiple vertical markets. ePMP is optimised for outdoor applications, offering connectivity up to 40 miles with Cambium antenna accessories and beyond 40 with higher...
    Wed, 11 Dec, 2019 at 4:45 PM
  • Point to Point Bridge using Cambium EPMP Force 300-16's
    A point to point bridge can solve many problems, from sharing your internet connection with your neighbor to bridging buildings together many kilometres apart. This blog has been made to run you through the process of configuring: 2x Cambium EPMP Force 300-16 Radios  Note: Basic knowledge of TCP/IP is required. There are a wide ...
    Fri, 8 May, 2020 at 3:44 PM
  • Contact Us
  • +64 3 741 1339

  • help@gowifi.co.nz
  • Go Wireless Warehouse/Office

    Unit 5, 1 Kingsford Smith Drive 7400, Rangiora
  • Connect with us
Terms of service

-

privacy policy

Copyright © Go Wireless NZ Ltd. All Rights Reserved.