Home Home Shop Browse Topics Blog
Home Shop Browse Topics Blog
Solution home Ubiquiti Networks

UniFi

  • Can't upgrade UniFi access point firmware (UAP Gen1 Series) prior to v3.7.x
    Background: If you are having issues upgrading your UniFi access points, a common issue that has recently occurred is a result of the UniFi access points running a very old firmware versions that require a staged upgrade to reach the current version. The UAP Gen1 series access points (UAP/UAP-LR/UAP-Outdoor/UAP-Outdoor-5) running firmware vers...
    Fri, 1 Nov, 2019 at 4:38 PM
  • Configuring a UniFi Access Point using the Unifi Controller Software on a Windows PC
    Below is a step by step guide on how to configure a UniFi Access Point using the Unifi Controller Software. Head to the link below, scroll down to the Software section, find and download the latest version of the software for your platfrom (Windows, Linux and macOS): https://www.ui.com/download/unifi Once downloaded run the UniFi-...
    Thu, 17 Dec, 2020 at 4:56 PM
  • Configuring an Advanced UniFi Network
    In this blog we will demonstrate how to configure an advanced UniFi network. The equipment we will be using is: UDM-Pro - https://www.gowifi.co.nz/ubiquitinetworks/udm-pro.html USW-24-POE - https://www.gowifi.co.nz/ubiquitinetworks/usw-24-poe.html UAP-NanoHD - https://www.gowifi.co.nz/ubiquitinetworks/uap-nanohd.html UAP-FlexHD - https://w...
    Thu, 3 Jun, 2021 at 2:15 PM
  • Creating vouchers for guest access in UniFi
    Login to the unifi controller and under settings choose Guest Control and enable Guest Portal option. Select Hotspot for the authentication type: Click on the Go to Hotspot Manager (bottom right corner) which takes you to a new window with voucher options. Choose the vouchers option on the left hand side then click on create vouchers...
    Thu, 13 Feb, 2020 at 2:34 PM
  • Creating WiFi Networks in UniFi v6.x.x
    In this blog we will demonstrate how to create a WiFi network within the UniFi Network Controller running v6.x.x using the "New" settings. How-to Step 1: Open your UniFi controller and navigate to the WiFi section of the Settings page Step 2: Fill in the following details Name - This is the WiFi name displayed on your phone/laptops...
    Thu, 25 Mar, 2021 at 9:34 AM
  • Dual WAN Policy Based Routing with a USG
    This article gives some examples on policy based routing with the UniFi Security Gateway. UniFi and the USG models currently support Load Balancing or Failover when configuring Dual WAN setup in UniFi however if you want to configure a more advanced Policy Based Routing then this guide is for you. Network Diagram: Preparation: It is ...
    Fri, 11 Oct, 2019 at 10:55 AM
  • How to set up a UniFi UDM-Pro on PPPoE WAN
    In this blog, we will demonstrate how to set up a UniFi Dream Machine Pro with PPPoE, VLAN-Tagged WAN. This is applies to internet providers such as Spark NZ. This blog will use a laptop to configure the appropriate settings. The UniFi Network mobile app could also be used.  Please note, the same configuration could also be applied to the s...
    Thu, 17 Dec, 2020 at 4:56 PM
  • Manage UniFi access points across multiple subnets with a single controller
                 Scenario: This scenario will explain how to managed UniFi Access Points across multiple subnets with only one UniFi Controller.  Important: As of writing, there is currently an issue with adopting UniFi Access Points across multiple subnets. As a result, we have adopted our UniFi Access Points with the Controller above on th...
    Wed, 11 Dec, 2019 at 1:31 PM
  • Testing the UniFi Site Magic feature
    From UI's press release: "Site Magic allows you to easily inter-connect UniFi Gateways across multiple locations with just a few clicks to create a high-performance and scalable SD-WAN. Instead of setting up complicated manual site-to-site VPNs and networking between multiple gateways, simply select the gateways you want to connect thro...
    Thu, 3 Aug, 2023 at 2:49 PM
  • UniFi access points on a different subnet to the controller
    Scenario: Your wireless network at your site is on a different subnet to what your UniFi controller is going to be sitting on. This guide assumes that you have already set up your UniFi Controller. Why you may do this: If your organisation has a lot of users/traffic, it is recommended to segment these into different networks to decreas...
    Wed, 11 Dec, 2019 at 11:50 AM
  • « Previous
  • 1
  • 2
  • Next »
  • Contact Us
  • +64 3 741 1339

  • help@gowifi.co.nz
  • Go Wireless Warehouse/Office

    Unit 5, 1 Kingsford Smith Drive 7400, Rangiora
  • Connect with us
Terms of service

-

privacy policy

Copyright © Go Wireless NZ Ltd. All Rights Reserved.